ASTM Standards. B227 Specification for Hard-Drawn Copper-Clad Steel Wire. B354 Terminology Relating to Uninsulated Metallic Electrical Conductors. B910/B910M Specification for Annealed Copper-Clad Steel Wire. E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications. ANSI Standards
ASTM B452 - 09(2015) - Standard Specification for Copper ASTM B1010/B1010M - 19 Standard Specification for Copper-Clad Steel Electrical Conductor for Tracer Wire Applications ASTM B910/B910M - 07(2018) Standard Specification for Annealed Copper-Clad Steel Wire
INTERNATIONAL Standard Specification for Annealed Copper-Clad Steel Wire1 This standard is issued under the fixed designation B910/B9l0M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision.
ASTM B910/B910M :Standard Specification for Annealed ASTM B910/B910M, 2007 Edition, October 1, 2007 - Standard Specification for Annealed Copper-Clad Steel Wire This specification covers bare round copper-clad steel for the following applications:electrical, electronic, grounding, telecommunications, and other applications.
ASTM B910/B910M-07 PDF (ELECTRONIC COPY) - $8.00 :e e-standard ASTM B910/B910M-07 PDF (ELECTRONIC COPY) - ASTM B910/B910M-07 Standard Specification for Annealed Copper-Clad Steel Wire
This specification covers annealed bare round copper-clad steel wire for the following applications:electrical, electronic, grounding, telecommunications, and other applications. Four types of copper-clad steel wires according to their electrical conductivities are included. The wire shall consist of a core of homogeneous open-hearth, electric-furnace, or basic-oxygen steel with a continuous outer cladding of copper
ASTM-B910, 2000 - MADCADASTM B910/B910M-00 Historical Standard:ASTM B910/B910M-00 Standard Specification for Annealed Copper-Clad Steel Wire SUPERSEDED (see Active link, below)
CCS Copper Clad Steel Wire - Yifang Electric Group Inc.Copper Clad Steel CCS ASTM STANDARD HIGH TENSILE STRENGTH 40% CONDUCTIVITY CCS. 21%, 30% and 40% IACS. CCS has more than 10 times the ex fatigue cycles compared to annealed solid copper. CCS is 65% stronger than Annealed Copper. CCS is more robust than Annealed Copper. CCS can be thermo or Cad Welded just like Copper.
Compliant with IEEE 80, ASTM B258, ASTM B910/B910M, ASTM B339, ASTM B227 Single strand Copperclad Steel Wire in large and small diameters RS Approved 7-strand Copperclad Steel Wire 19-strand Copperclad Steel Wire Dead Soft Annealed Copperclad Steel Wire Copperclad Steel Wire is a strong, non-rusting, efficient grounding conductor. It is
China Annealed Steel, Annealed Steel Manufacturers China Annealed Steel manufacturers - Select 2021 high quality Annealed Steel products in best price from certified Chinese Steel Wire manufacturers, Mould Steel suppliers, wholesalers and factory on Made-in-China
Copperclad Dead Soft Annealed Steel WireSpecial heat treat process results in a very malleable wire called Dead Soft Annealed (DSA) Copper permanently bonded to the steel core prevents corrosive of the steel core. Very little scrap value, discouraging theft and leaving the grounding system intact; Compliant with IEEE 80, ASTM B258, ASTM B910/B910M, ASTM B339, ASTM B227
1. Material Description:Copperhead Copper-clad steel wire as manufactured by Copperweld® is composed of a steel core with a uniform and continuous copper cladding thoroughly bonded to the steel throughout. Wire must conform with ASTM B910 / B910M a. Cladding:The steel and copper interface must have a metallurgical bond achieved
HIGH S 1230 CCS T - Copper Clad Steel Tracer Wire steel core with a uniform and continuous copper cladding thoroughly bonded to the steel throughout. Wire must conform to ASTM B1010 and ASTM B910 / B910M. Cladding:The steel and copper interface must have a metallurgical bond achieved through a high heat and pressure bonding process. Established process for porosity-free material.
Pro-Line - HIGH-FLEX COPPER CLAD STEEL PE30 Ellis Wheeler*Engineering Specifications Tracer wire for open-cut installation shall be a 12 AWG solid, PRO-TRACE HF-CCS PE30. Conductor shall be annealed, 21% IACS, copper-clad steel, utilizing a AISI 1006 low carbon steel core with minimum break load of 282 lbs or 55,000 psi (required to meet break load, flexbility, and ASTM B910).